TACTILE PAVER
What is Tactile Paver
Design
Concrete tactile pavers are designed to assist visually impaired individuals by providing a tactile warning of upcoming hazards, such as street crossings, stairs, and other changes in elevation. These pavers have raised tactile patterns that can be detected by touch and a distinctive color contrast to the surrounding surface. They are commonly used in public spaces and pedestrian areas to improve accessibility and safety.
Installation
Concrete tactile pavers are typically installed by first preparing the ground and creating a base layer. The pavers are then laid on top of the base layer and interlocked with each other to create a stable and secure surface. The pavers are usually fixed in place using a special adhesive or mortar to prevent them from shifting or moving.
guidance
Concrete tactile pavers are commonly used in outdoor public spaces such as sidewalks, pedestrian crossings, train platforms, and bus stops to provide a textured surface that can be felt by individuals with visual impairments or mobility impairments. They can also be used in private settings such as driveways, patios, and garden paths.
ST-R (LINE)
ST-R (LINE)
size: 300 x 300 X 30 mm
200 pcs / plt
ST-F (LINE)
size: 395 x 395 X 40 mm
104 pcs / plt
COLOR AVAILABLE
ST-R1 (GREY)
ST-R2 (BLACK)
ST-R5 (YELLOW)
ST-F1 (GREY)
ST-F2 (BLACK)
ST-F5 (YELLOW)
ST-N (DOT)
ST-N (DOT)
size: 300 x 300 x 30 mm
200 pcs / plt
ST-G (DOT)
size: 395 x 395 x 40 mm
104 pcs / plt
COLOR AVAILABLE
ST-N1 (GREY)
ST-N2 (BLACK)
ST-N5 (YELLOW)
ST-G1(GREY)
ST-G2 (BLACK)
ST-G5 (YELLOW)
PRODUCT GALLERY
Note:
Efflorescence can occur on concrete tactile pavers just as it can occur on other concrete products. Efflorescence is the white, powdery substance that appears on the surface of concrete due to the migration of salts. Efflorescence does not cause any actual damage, but it is likely to occur in humid conditions during the rainy season, and it is impossible to completely prevent it. If efflorescence does occur, it can be removed with a variety of cleaning methods, such as brushing, pressure washing, or using an efflorescence cleaner.
The colors on this website are as close to the actual products as possible, but variations should be expected. All of our products are manufactured to allow a tolerance of ±3 mm for dimensions.